Runs All Day
A two-stage cast-iron pump builds pressure fast and keeps it there. Rotate tires, run a sander or lay down a coat of paint — the CM-60 recovers before you're ready for the next pass.
Two-Stage Cast-Iron Pump
Lower operating temperature and a longer service life than single-stage aluminum pumps.
75% Duty Cycle
Oversized cooling fins and a high-flow intercooler keep it running through long jobs.
Thermal Protection
Automatic overload shutoff protects the motor and resets itself once it cools.
Tough Outside. Quiet Inside.
A faceted, brushed stainless shell takes the hits a garage throws at it. Underneath, isolated motor mounts and an acoustic liner cut the roar to a hum.
- Stainless steel shellCorrosion resistant, wipes clean, never needs paint.
- Auto tank drainTimed condensate purge, so moisture never builds up.
- Anti-vibration feetNo bolting required on most garage floors.
Every Tool in the Shop
Airflow requirements at 90 PSI. The CM-60 delivers 17.2 CFM — enough to run any of these, and most of them at once.
1/2" Impact Wrench
Lug nuts, suspension, heavy fasteners.
HVLP Spray Gun
Automotive paint and clear coat.
Dual-Action Sander
Bodywork, prep and finishing.
Die Grinder
Porting, cutting and cleanup.
Framing Nailer
Decks, framing and fencing.
Tire Inflator
Cars, trucks, trailers and toys.
CM-60 Vertical
- Max pressure
- 175 PSI
- Pump
- Two-stage, cast iron, oil-lubricated
- Air delivery @ 90 PSI
- 17.2 CFM
- Air delivery @ 40 PSI
- 19.5 CFM
- Tank
- 60 gal vertical, ASME-rated
- Duty cycle
- 75%
- Motor
- 5 HP induction
- Noise
- 72 dB @ 3 ft
- Power
- 240V single-phase · 22 A
- Recommended breaker
- 30 A
- Dimensions (W × D × H)
- 30 × 26 × 72 in
- Weight
- 410 lb
- Outlet
- 1/2" NPT · universal coupler
- Warranty
- 2-year full · 5-year pump